Welding Handbook Quick View

SAW

PF-H55LT / US-36

SAW flux and wire combination
Features:
  • Suitable for welding of structures for low temperature service
  • Excellent impact value down to -60°C and CTOD down to -50°C
Classification:AWS A5.17 F7A8-EH14, F7P8-EH14
Type of flux:Bonded
Redrying of flux:200-300°Cx1h
Polarity:AC
Welding Positions: Canvas is Not Supported.

Packaging data

FluxMeshCanWireφ mmCoil
PF-H55LT10x4820kgUS-363.225kg76kg-




4.025kg75kg150kg




4.825kg75kg150kg
Volume mm240W, 350H, 240LVolume mm430W, 90H, 430L740W, 110H, 740L840W, 110H, 840L

Composition (wire mass%)

 TypicalGuarantya
C0.120.10-0.20
Si0.030.10
Mn1.951.70-2.20
P0.0130.030
S0.0080.030
Cu0.120.35
Note: aSingle values are maximium.

Composition (weld metal mass %)

 Typical
C0.08
Si0.19
Mn1.42
P0.013
S0.005
Ti0.02
B0.004

Weld mechanical properties

 TypicalGuaranty
0.2%YS (MPa)490460400min.
TS (MPa)555540483-655
EI on 4d (%)343422min.
IV -62°C (J)18016027min.
PWHT (°Cxh)AW620x1AW & 620±15x1

Approvals / Click here for certificates


SingleTandem
ABS3M, 3YM, MG
4YM, MG
LR5Y40M, H5-
DNVⅤYM,VL2-4,VL4-4ⅤYM
BVA4YM, UP-
NKKAWL3MKAWL3M

Click here for SDS

Page Top

Products