Welding Handbook Quick View

SAW

G-50/ US-36

SAW flux and wire combination
Features:
  • Suitable for welding of thin plates at high speeds
  • DCEP is better for sheet metal of 4mm or thinner
Classification:AWS A5.17 F7A2-EH14
Type of flux:Fused
Redrying of flux:150-350°Cx1h
Polarity:AC
Welding Positions: Canvas is Not Supported.

Packaging data

FluxMeshCan



G-50
8x4825kg




Volume mm240W, 350H, 240L



Wireφ mmSpoolCoilDrum
US-361.610kg
20kg-
-
-
-

2.010kg
20kg-
-
-
-

2.410kg
-
25kg76kg-
300kg

3.2--
25kg76kg-
300kg

4.0
--
25kg75kg150kg300kg

4.8--
25kg75kg150kg-

6.4--
25kg78kg
159kg-
Volume mm240W, 110H, 240L300W, 110H, 300L430W, 90H, 430L740W, 110H, 740L840W, 110H, 840L680φ,
770H(2.4φmm)
600φ, 920H(3.2,4.0φmm)

Composition (wire mass%)

 TypicalGuarantya
C0.120.10-0.20
Si0.030.10
Mn1.951.70-2.20
P0.0130.030
S0.0050.030
Cu0.110.35
Note: aSingle values are maximium.

Composition (weld metal mass %)


Typical
C0.06
Si0.44
Mn1.83
P0.012
S0.004

All-weld mechanical properties

 TypicalGuaranty
0.2%YS (MPa)440400min.
TS (MPa)540483-655
EI on 4d (%)2922min.
IV -29°C (J)4027min.

Click here for SDS

Page Top

Products