GMAW
MG-S2CW
Solid wire for low C-2.25%Cr-W-V-Nb steel
| Features: | - Applied for ASTM A335 Gr. P23 and equivalents
|
|---|
| Classification: | AWS A5.28 ER90S-G |
|---|
| Shielding gas: | Ar-5-20%CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Spool | Drum |
|---|
| 1.0 | 10kg | - |
| 1.2 | 10kg | 250kg |
| Volume mm | 240W, 110H, 230L | 530 φ , 820H |
|---|
Composition (wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.04 | 0.12 |
|---|
| Si | 0.38 | 0.10-0.60 |
|---|
| Mn | 1.16 | 0.80-1.60 |
|---|
| P | 0.003 | 0.020 |
|---|
| S | 0.007 | 0.010 |
|---|
| Ni | 0.55 | 0.30-1.00 |
|---|
| Cr | 2.24 | 2.00-2.60 |
|---|
| Mo | 0.10 | 0.05-0.30 |
|---|
| Cu | 0.13 | 0.40 |
|---|
| Nb | 0.04 | 0.01-0.08 |
|---|
| V | 0.27 | 0.15-0.30 |
|---|
| W | 1.80 | 1.00-2.00 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F | 2G, 3G uphill, 4G |
|---|
| 1.2 | 240-300 | 130-190 |
All-weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 660 | 490min. |
|---|
| TS (MPa) | 730 | 621min. |
|---|
| EI on 4d (%) | 19 | 15min. |
|---|
| IV 0°C (J) | 40 | - |
|---|
| PWHT (°Cxh) | 715x2 | 715x2 |
|---|
| SG | Ar-20%CO2 | Ar-20%CO2 |
|---|
