SMAW
NC-36LT
Stick electrode
| Features: | - Suitable for 18%Cr-12%Ni-2%Mo steel for cryogenic temperature service
|
|---|
| Classification: | AWS A5.4 E316L-16 |
|---|
| Redrying Conditions: | 150~200℃x 0.5~1h |
|---|
| Identification color: | 1st Green |
|---|
| Polarity: | AC, DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Length mm | kg/pack | kg/carton | g/piece | carton mm |
|---|
| 2.6 | 300 | 2 | 20 | 19 | 300W, 100H, 330L |
| 3.2 | 350 | 5 | 20 | 34 | 175W, 110H, 380L |
| 4.0 | 350 | 5 | 20 | 51 | 175W, 115H, 380L |
| 5.0 | 350 | 5 | 20 | 78 | 175W, 115H, 380L |
Composition (all-weld metal mass %)
| | Typical (AC) | Guarantya |
|---|
| C | 0.03 | 0.04 |
|---|
| Si | 0.59 | 1.00 |
|---|
| Mn | 2.0 | 0.5-2.5 |
|---|
| P | 0.03 | 0.04 |
|---|
| S | <0.01 | 0.03 |
|---|
| Ni | 13.1 | 11.0-14.0 |
|---|
| Cr | 18.0 | 17.0-20.0 |
|---|
| Mo | 2.2 | 2.0-3.0 |
|---|
| Cu | 0.05 | 0.75 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F, 2G | 3G uphill, 4G |
|---|
| 2.6 | 50-85 | 45-80 |
| 3.2 | 70-115 | 65-110 |
| 4.0 | 95-145 | 85-130 |
| 5.0 | 135-180 | - |
All-weld mechanical properties
| | Typical (AC) | Guaranty |
|---|
| 0.2%YS (MPa) | 390 | - |
|---|
| TS (MPa) | 530 | 483min. |
|---|
| EI on 4d (%) | 44 | 30min. |
|---|
| IV -196°C (J) | 40 | 27min. |
|---|
