SAW
PF-200D/ US-521S
Flux and wire combination for 2.25%Cr-1%Mo-V steel
| Features: | - Applied for ASTM A387 Gr.22 and equivalents
- Excellent notch tonghness
|
|---|
| Classification: | AWS A5.23 F9P2-EG-B3 |
|---|
| Type of flux: | Bonded |
|---|
| Redrying of flux: | 200-300°Cx1h |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| Flux |
| Can | Wire | φ mm | Coil |
|---|
| PF-200D | 10x48 | 20kg | US-521S | 3.2 | 25kg | - | 150kg |
|---|
|
|
|
| 4.0 | 25kg | 75kg | 150kg |
| Volume mm | 240W, 350H, 240L | Volume mm | 430W, 90H, 430L | 740W, 110H, 740L | 840W,110H, 840L |
|---|
Composition (wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.16 | 0.08-0.18 |
|---|
| Si | 0.13 | 0.25 |
|---|
| Mn | 0.93 | 0.80-1.20 |
|---|
| P | 0.003 | 0.012 |
|---|
| S | 0.002 | 0.012 |
|---|
| Ni | 0.14 | 0.25 |
|---|
| Cr | 2.45 | 2.20-2.70 |
|---|
| Mo | 1.00 | 0.90-1.20 |
|---|
| Cu | 0.12 | 0.30 |
|---|
| Note: aSingle values are maximium. |
Composition (weld metal mass %)
| | Typical | Guarantya |
|---|
| C | 0.09 | 0.05-0.15 |
|---|
| Si | 0.16 | 0.80 |
|---|
| Mn | 0.81 | 1.20 |
|---|
| P | 0.006 | 0.030 |
|---|
| S | 0.003 | 0.030 |
|---|
| Ni | 0.13 | 0.25 |
|---|
| Cr | 2.41 | 2.00-2.50 |
|---|
| Mo | 1.07 | 0.90-1.20 |
|---|
| Cu | 0.13 | 0.35 |
|---|
| Note: aSingle values are maximium. |
Weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 510 | 538min. |
|---|
| TS (MPa) | 620 | 621-758 |
|---|
| EI on 4d (%) | 26 | 17min. |
|---|
| IV -29°C (J) | 160 | 27min. |
|---|
| PWHT (°Cxh) | 690x6 | 690±15x1 |
|---|
