SMAW
NB-1SJ
Stick electrode
| Features: | - Good CTOD properties down to -45°C
- Good impact values down to -80°C
|
|---|
| Classification: | AWS A5.5 E8016-G |
|---|
| Redrying Conditions: | 350-400°Cx1h |
|---|
| Identification color: | 1st White, 2nd Brown |
|---|
| Polarity: | AC |
|---|
Welding Positions:
Packaging data
| φ mm | Length mm | kg/pack | kg/carton | g/piece | carton mm |
|---|
2.6
| 300
| 2
| 20
| 17
| 270W, 90H, 330L
|
| 3.2 | 350 | 5 | 20 | 31 | 170W, 120H, 380L |
| 4.0 | 400 | 5 | 20 | 55 | 170W, 120H, 430L |
| 5.0 | 450 | 5 | 20 | 97 | 170W, 110H, 480L |
Composition (all-weld metal mass %)
| | Typical | Guarantya |
|---|
| C | 0.07 | 0.10 |
|---|
| Si | 0.43 | 0.15-0.50 |
|---|
| Mn | 1.36 | 1.10-1.17 |
|---|
| P | 0.01 | 0.03 |
|---|
| S | <0.01 | 0.03 |
|---|
| Ni | 1.37 | 1.10-1.70 |
|---|
| Ti | 0.021 | 0.0050-0.035 |
|---|
| B | 0.0035 | 0.0005-0.0045 |
|---|
| Note: aSingle values are maximium. |
Recommended welding parameters
| φ mm | 1F, 1G, 2F, 2G | 3G uphill, 4G |
|---|
2.6
| 55~85
| 50~80
|
| 3.2 | 90-130 | 80-120 |
| 4.0 | 130-180 | 110-170 |
| 5.0 | 180-240 | 150-200 |
All-weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 520 | 490 | 462min. |
|---|
| TS (MPa) | 610 | 580 | 552min. |
|---|
| EI on 4d (%) | 29 | 29 | 19min. |
|---|
| IV -80°C (J) | 127 | 130 | -60°C : 27min. |
|---|
| PWHT (°Cxh) | AW | 620x1 | AW & 620±15x1 |
|---|
ABS
| 5YQ420 H5
|
|---|
| LR | 5YQ40m H5
|
|---|
| DNV | 5YH5, VL2-4L, 4-4L
|
|---|
| BV | 5Y40M H5
|
|---|
| NK | KMW5Y42 H5
|
|---|
