FCAW
DW-55L
Flux cored wire
| Features: | - Excellent impact values down to -60°C
|
|---|
| Classification: | AWS A5.29 E81T1-K2C |
|---|
| Shielding gas: | CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
φ mm
| Spool |
|---|
| 1.2 | 12.5kg | 15kg | 20kg |
| 1.4 | - | 15kg | - |
| Volume mm | 300W, 110H, 300L |
|---|
Composition (all-weld metal mass %)
| | Typical | Guarantya |
|---|
| C | 0.04 | 0.15 |
|---|
| Si | 0.38 | 0.80 |
|---|
| Mn | 1.32 | 0.50-1.75 |
|---|
| P | 0.010 | 0.030 |
|---|
| S | 0.008 | 0.030 |
|---|
| Ni | 1.51 | 1.00-2.00 |
|---|
| Cr | 0.02 | 0.15 |
|---|
| Mo | 0.01 | 0.35 |
|---|
| V | 0.02 | 0.05 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G | 2F | 2G | 3G uphill, 4G |
|---|
| 1.2 | 150-300 | 150-300 | 150-280 | 150-250 |
| 1.4 | 150-400 | 150-350 | 150-300 | 150-250 |
All-weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 550 | 469min. |
|---|
| TS (MPa) | 620 | 552-689 |
|---|
| EI on 4d (%) | 27 | 22min. |
|---|
| IV -60°C (J) | 70 | 27min. |
|---|
| ABS | 3YSA,5Y400SA,MG, H5
|
|---|
| LR | 5Y40S, 5Y40M, H5 |
|---|
| DNV | ⅤY40MS (H5) |
|---|
| BV | SA5Y40M H5 |
|---|
| NK | KSWL3G (C),KSWL3G(C)H5-TS540M, KSW54Y40G (C), H5 |
|---|
| KR | L 3SG (C) H5, 5Y40SG (C) H5
|
|---|
| CCS | 5Y40S H5
|
|---|
