FCAW
DW-308LT
Flux cored wire
| Features: | - Suitable for 18%Cr-8%Ni steel for low temperature service
|
|---|
| Classification: | AWS A5.22 E308LT0-1/4 |
|---|
| Shielding gas: | CO2 or Ar-CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Spool |
|---|
| 1.2 | 12.5kg |
| Volume mm | 295W, 110H, 295L |
|---|
Composition (all-weld metal mass %)
| | Typical (CO2) | Guarantya |
|---|
| C | 0.03 | 0.04 |
|---|
| Si | 0.3 | 1.0 |
|---|
| Mn | 2.2 | 0.5-2.5 |
|---|
| P | 0.02 | 0.04 |
|---|
| S | 0.01 | 0.03 |
|---|
| Ni | 10.3 | 9.0-11.0 |
|---|
| Cr | 18.6 | 18.0-21.0 |
|---|
| Mo | 0.01 | 0.75 |
|---|
| Cu | 0.05 | 0.75 |
|---|
| Bi | >0.002 | - |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F | 2G |
|---|
| 1.2 | 130-270 | 150-220 |
All-weld mechanical properties
| | Typical (CO2) | Guaranty |
|---|
| 0.2%YS (MPa) | 380 | - |
|---|
| TS (MPa) | 530 | 518min. |
|---|
| EI on 4d (%) | 51 | 30min. |
|---|
| IV -196°C (J) | 39 | 27min. |
|---|
