FCAW
DW-410Cb
Flux cored wire
| Features: | - Suitable for 13%Cr martensitic stainless steel such as 403 and 410 types and 13%Cr ferritic stainless steels such as 405 type
|
|---|
| Classification: | AWS A5.22 E409NbT0-1 |
|---|
| Shielding gas: | CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Spool |
|---|
| 1.2 | 12.5kg |
| Volume mm | 295W, 110H, 295L |
|---|
Composition (all-weld metal mass %)
| | Typical (CO2) | Guarantya |
|---|
| C | 0.05 | 0.10 |
|---|
| Si | 0.5 | 1.0 |
|---|
| Mn | 0.7 | 1.2 |
|---|
| P | 0.03 | 0.04 |
|---|
| S | <0.01 | 0.03 |
|---|
| Ni | 0.1 | 0.6 |
|---|
| Cr | 12.6 | 10.5-13.5 |
|---|
| Mo | <0.1 | 0.5 |
|---|
| Cu | <0.1 | 0.5 |
|---|
| Nb+Ta | 0.64 | 8xC-1.5 |
|---|
| Bi | >0.002 | - |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F |
|---|
| 1.2 | 130-270 |
All-weld mechanical properties
| | Typical (CO2) | Guaranty |
|---|
| 0.2%YS (MPa) | 282 | - |
|---|
| TS (MPa) | 515 | 449min. |
|---|
| EI on 4d (%) | 30 | 15min. |
|---|
| IV (J) | - | - |
|---|
| PWHT (°Cxh) | 775x2 | 760-790x2 |
|---|
