FCAW
MX-A410NiMo
Flux cored wire
| Features: | - Suitable for 13%Cr-Ni steel
- Preheat (100℃) must be done depending on thickness of base metal
|
|---|
| Classification: | AWS A5.22 EC410NiMo |
|---|
| Shielding gas: | Ar-CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Spool |
|---|
| 1.2 | 12.5kg |
| Volume mm | 295W, 110H, 295L |
|---|
Composition (all-weld metal mass %)
| | Typical | Guarantya |
|---|
| C | 0.02 | 0.06 |
|---|
| Si | 0.3 | 0.5 |
|---|
| Mn | 0.5 | 0.6 |
|---|
| P | 0.02 | 0.03 |
|---|
| S | 0.01 | 0.03 |
|---|
| Ni | 4.2 | 4.0-5.0 |
|---|
| Cr | 12.0 | 11.0-12.5 |
|---|
| Mo | 0.5 | 0.4-0.7 |
|---|
| Cu | 0.03 | 0.75 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F |
|---|
| 1.2 | 180-320 |
All-weld mechanical properties
| | Typical |
|---|
| 0.2%YS (MPa) | 870 |
|---|
| TS (MPa) | 920 |
|---|
| EI on 4d (%) | 20 |
|---|
| IV 0°C (J) | 64 |
|---|
| PWHT(°Cxh) | 600x1 |
|---|
