GTAW
TG-S316
Filler rod and wire
| Features: | - Suitable for 18%Cr-12%Ni-2%Mo steel
|
|---|
| Classification: | AWS A5.9 ER316 |
|---|
| Shielding gas: | Ar |
|---|
| Identification color: | 1st White |
|---|
| Polarity: | DCEN |
|---|
Welding Positions:
Packaging data
| | Spool | Tube |
|---|
| φ mm | kg | kg | Length mm | g/piece |
|---|
| 1.0 | 10 | 5 | 1,000 | 6 |
| 1.2 | 10 | 5 | 1,000
| 9 |
| 1.6 | 10 | 5 | 1,000 | 16 |
| 2.0 | - | 5 | 1,000 | 25 |
| 2.4 | - | 5 | 1,000 | 36 |
| 3.2 | - | 5 | 1,000 | 64 |
| Volume mm | 240W, 110H, 240L | 40W, 35H, 1015L |
|---|
Composition (rod and wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.04 | 0.08 |
|---|
| Si | 0.47 | 0.30-0.65 |
|---|
| Mn | 1.5 | 1.0-2.5 |
|---|
| P | 0.03 | 0.03 |
|---|
| S | <0.01 | 0.03 |
|---|
| Ni | 12.0 | 11.0-14.0 |
|---|
| Cr | 19.1 | 18.0-20.0 |
|---|
| Mo | 2.1 | 2.0-3.0 |
|---|
| Cu | 0.26 | 0.75 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm |
|
|---|
| 1.0 | 50-80 |
| 1.2 | 50-100 |
| 1.6 | 100-200 |
| 2.0 | 100-200 |
| 2.4 | 150-250 |
| 3.2 | 200-300 |
All-weld mechanical properties
| | Typical |
|---|
| 0.2%YS (MPa) | 390 |
|---|
| TS (MPa) | 570 |
|---|
| EI on 4d (%) | 42 |
|---|
| IV 0°C (J) | 110 |
|---|
