GTAW
TG-S317L
Filler rod and wire
| Features: | - Suitable for low carbon 18%Cr-12%Ni-2%Mo-N and low carbon 19%Cr-13%Ni-3%Mo steel
|
|---|
| Classification: | AWS A5.9 ER317L |
|---|
| Shielding gas: | Ar |
|---|
| Identification color: | 1st Sorrel |
|---|
| Polarity: | DCEN |
|---|
Welding Positions:
Packaging data
| | Spool | Tube |
|---|
| φ mm | kg | kg | Length mm | g/piece |
|---|
| 1.6 | 10 | 5 | 1,000 | 16 |
| 2.0 | - | 5 | 1,000 | 25 |
| 2.4 | - | 5 | 1,000 | 36 |
| 3.2 | - | 5 | 1,000 | 64 |
| Volume mm | 240W, 110H, 240L | 40W, 35H, 1015L |
|---|
Composition (rod and wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.01 | 0.03 |
|---|
| Si | 0.43 | 0.30-0.65 |
|---|
| Mn | 1.8 | 1.0-2.5 |
|---|
| P | 0.02 | 0.03 |
|---|
| S | <0.01 | 0.03 |
|---|
| Ni | 13.1 | 13.0-15.0 |
|---|
| Cr | 18.8 | 18.5-20.5 |
|---|
| Mo | 3.4 | 3.0-4.0 |
|---|
| Cu | 0.04 | 0.75 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm |
|
|---|
| 1.6 | 100-200 |
| 2.0 | 100-200 |
| 2.4 | 150-250 |
| 3.2 | 200-300 |
All-weld mechanical properties
| | Typical |
|---|
| 0.2%YS (MPa) | 410 |
|---|
| TS (MPa) | 570 |
|---|
| EI on 4d (%) | 39 |
|---|
| IV 0°C (J) | 98 |
|---|
