GTAW
TG-S2209
Filler rod and wire
| Features: | - Suitable for normal duplex stainless steel (S32205, S31803, etc.)
|
|---|
| Classification: | AWS A5.9 ER2209 |
|---|
| Shielding gas: | Ar or Ar-2%N2 |
|---|
| Identification color: | 1st Red, 2nd Green |
|---|
| Polarity: | DCEN |
|---|
Welding Positions:
Packaging data
| | Spool | Tube |
|---|
| φ mm | kg | kg | Length mm | g/piece |
|---|
| 1.2 | 10 | 5 | 1,000
| 9 |
| 1.6 | - | 5 | 1,000 | 16 |
| 2.0 | - | 5 | 1,000 | 25 |
| 2.4 | - | 5 | 1,000 | 36 |
| 3.2 | - | 5 | 1,000 | 64 |
| Volume mm | 240W, 110H, 240L | 40W, 35H, 1015L |
|---|
Composition (rod and wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.01 | 0.03 |
|---|
| Si | 0.38 | 0.90 |
|---|
| Mn | 1.49 | 0.50-2.00 |
|---|
| P | 0.02 | 0.03 |
|---|
| S | <0.01 | 0.03 |
|---|
| Ni | 8.6 | 7.5-9.5 |
|---|
| Cr | 23.0 | 21.5-23.5 |
|---|
| Mo | 3.3 | 2.5-3.5 |
|---|
| Cu | 0.05 | 0.75 |
|---|
| N | 0.15 | 0.08-0.20 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm |
|
|---|
| 1.2 | 50-100 |
| 1.6 | 100-200 |
| 2.0 | 100-200 |
| 2.4 | 150-250 |
| 3.2 | 200-300 |
All-weld mechanical properties
| | Typical |
|---|
| 0.2%YS (MPa) | 615 |
|---|
| TS (MPa) | 814 |
|---|
| EI on 4d (%) | 38 |
|---|
| IV -50°C (J) | 150 |
|---|
