GTAW
TG-S2594
Filler rod and wire
| Features: | - Suitable for super duplex stainless steel (S32750, S32760, etc.)
|
|---|
| Classification: | AWS A5.9 ER2594 |
|---|
| Shielding gas: | Ar or Ar-2%N2 |
|---|
| Identification color: | 1st Red, 2nd Blue |
|---|
| Polarity: | DCEN |
|---|
Welding Positions:
Packaging data
| | Spool | Tube |
|---|
| φ mm | kg | kg | Length mm | g/piece |
|---|
| 1.2 | 10 | 5 | 1,000
| 9 |
| 1.6 | - | 5 | 1,000 | 16 |
| 2.0 | - | 5 | 1,000 | 25 |
| 2.4 | - | 5 | 1,000 | 36 |
| 3.2 | - | 5 | 1,000 | 64 |
| Volume mm | 240W, 110H, 240L | 40W, 35H, 1015L |
|---|
Composition (rod and wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.01 | 0.03 |
|---|
| Si | 0.4 | 1.0 |
|---|
| Mn | 0.6 | 2.5 |
|---|
| P | 0.02 | 0.03 |
|---|
| S | <0.01 | 0.02 |
|---|
| Ni | 9.2 | 8.0-10.5 |
|---|
| Cr | 24.8 | 24.0-27.0 |
|---|
| Mo | 3.8 | 2.5-4.5 |
|---|
| Cu | 0.1 | 1.5 |
|---|
| N | 0.26 | 0.20-0.30 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm |
|
|---|
| 1.2 | 50-100 |
| 1.6 | 100-200 |
| 2.0 | 100-200 |
| 2.4 | 150-250 |
| 3.2 | 200-300 |
All-weld mechanical properties
| | Typical (Ar-2%N2) |
|---|
| 0.2%YS (MPa) | 646 |
|---|
| TS (MPa) | 859 |
|---|
| EI on 4d (%) | 38 |
|---|
| IV -50°C (J) | 171 |
|---|
| ABS | MG(AWS A5.9 ER2594) |
|---|
| LR | S32750m(Chem) |
|---|
| DNV | MG(Super duplex) |
|---|
| BV | UP(AWS A5.9 ER2594) |
|---|
| NK | MG |
|---|
| CCS | 2750 |
|---|
