GTAW
TG-S410Cb
Filler rod and wire
| Features: | - Suitable for 13%Cr and 13%Cr-Al steel
|
|---|
| Classification: | AWS - |
|---|
| Shielding gas: | Ar |
|---|
| Identification color: | 1st Purple |
|---|
| Polarity: | DCEN |
|---|
Welding Positions:
Packaging data
| | Spool | Tube |
|---|
| φ mm | kg | kg | Length mm | g/piece |
|---|
| 1.2 | 10 | 5 | 1,000
| 9 |
| 1.6 | 10 | 5 | 1,000 | 16 |
| 2.0 | - | 5 | 1,000 | 25 |
| 2.4 | - | 5 | 1,000 | 36 |
| 3.2 | - | 5 | 1,000 | 64 |
| Volume mm | 240W, 110H, 240L | 40W, 35H, 1015L |
|---|
Composition (rod and wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.09 | 0.12 |
|---|
| Si | 0.41 | 0.50 |
|---|
| Mn | 0.46 | 0.60 |
|---|
| P | 0.007 | 0.030 |
|---|
| S | 0.002 | 0.030 |
|---|
| Ni | 0.07 | 0.60 |
|---|
| Cr | 11.93 | 11.50-13.50 |
|---|
| Mo | 0.01 | 0.75 |
|---|
| Cu | 0.01 | 0.75 |
|---|
| Nb | 0.89 | 0.70-1.10 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm |
|
|---|
| 1.2 | 50-100 |
| 1.6 | 100-200 |
| 2.0 | 100-200 |
| 2.4 | 150-250 |
| 3.2 | 200-300 |
All-weld mechanical properties
| | Typical |
|---|
| 0.2%YS (MPa) | 270 |
|---|
| TS (MPa) | 540 |
|---|
| EI on 4d (%) | 23 |
|---|
| IV 20°C (J) | 39 |
|---|
