SMAW
CM-B98
Stick electrode for 1-1.25%Cr-0.5%Mo steel
| Features: | - Applied for ASTM A387 Gr.11, Gr.12 and equivalents
|
|---|
| Classification: | AWS A5.5 E8018-B2 |
|---|
| Redrying Conditions: | 325-375°Cx1h |
|---|
| Identification color: | 1st Black, 2nd Yellowish green |
|---|
| Polarity: | AC, DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Length mm | kg/pack | kg/carton | g/piece | carton mm |
|---|
| 2.6 | 300 | 2 | 20 | 19 | 170W, 120H, 330L |
| 3.2 | 400 | 5 | 20 | 38 | 170W, 120H, 430L |
| 4.0 | 450 | 5 | 20 | 69 | 170W, 120H, 480L |
| 5.0 | 450 | 5 | 20 | 106 | 170W, 120H, 480L |
| 6.0 | 450 | 5 | 20 | 154 | 170W, 120H, 480L
|
Composition (all-weld metal mass %)
| | Typical (AC) | Guarantya |
|---|
| C | 0.07 | 0.05-0.12 |
|---|
| Si | 0.73 | 0.80 |
|---|
| Mn | 0.78 | 0.90 |
|---|
| P | 0.01 | 0.03 |
|---|
| S | <0.01 | 0.03 |
|---|
| Cr | 1.31 | 1.00-1.50 |
|---|
| Mo | 0.54 | 0.40-0.65 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F, 2G | 3G uphill, 4G |
|---|
| 2.6 | 65-95 | 60-90 |
| 3.2 | 90-130 | 80-120 |
| 4.0 | 135-185 | 110-170 |
| 5.0 | 190-250 | - |
| 6.0 | 250-320 | - |
All-weld mechanical properties
| | Typical (AC) | Guaranty |
|---|
| 0.2%YS (MPa) | 590 | 462min.
|
|---|
| TS (MPa) | 690 | 552min. |
|---|
| EI on 4d (%) | 26 | 19min. |
|---|
| IV 0°C (J) | 70 | - |
|---|
| PWHT (°Cxh) | 690x1 | 690±15x1 |
|---|
